texte.h - Polytech Ge Sous Traitance - Forge Polytech

Feature #12061 » texte.h

Anonyme, 04/01/2020 22:37

    
    #ifndef TEXTE_H_

    #define TEXTE_H_

    // DALI, CGLine, CGLine+

    //English

    #define TXT_CONFIG                      "Current configuration:"

    #define TXT_LANG                        "Language: English"

    #define TXT_OUT                         "Output:"

    #define TXT_DALI_CMD_DAPC               "DIRCT ARC POWER CONTROL"

    #define TXT_DALI_CMD_000                "OFF"

    #define TXT_DALI_CMD_001                "UP"

    #define TXT_DALI_CMD_002                "DOWN"

    #define TXT_DALI_CMD_003                "STEP UP"

    #define TXT_DALI_CMD_004                "STEP DOWN"

    #define TXT_DALI_CMD_005                "RECALL MAX LEVEL"

    #define TXT_DALI_CMD_006                "RECALL MIN LEVEL"

    #define TXT_DALI_CMD_007                "STEP DOWN AND OFF"

    #define TXT_DALI_CMD_008                "ON AND STEP UP"

    #define TXT_DALI_CMD_009                "ENABLE DAPC SEQUENCE"

    #define TXT_DALI_CMD_016_031            "GO TO SCENE"

    #define TXT_DALI_CMD_032                "RESET"

    #define TXT_DALI_CMD_033                "STORE ACTUAL LEVEL IN THE DTR"

    #define TXT_DALI_CMD_042                "STORE THE DTR AS MAX LEVEL"

    #define TXT_DALI_CMD_043                "STORE THE DTR AS MIN LEVEL"

    #define TXT_DALI_CMD_044                "STORE THE DTR AS SYSTEM FAILURE LEVEL"

    #define TXT_DALI_CMD_045                "STORE THE DTR AS POWER ON LEVEL"

    #define TXT_DALI_CMD_046                "STORE THE DTR AS FADE TIME"

    #define TXT_DALI_CMD_047                "STORE THE DTR AS FADE RATE"

    #define TXT_DALI_CMD_064_079            "STORE THE DTR AS SCENE"

    #define TXT_DALI_CMD_080_095            "REMOVE FROM SCENE"

    #define TXT_DALI_CMD_096_111            "ADD TO GROUP"

    #define TXT_DALI_CMD_112_127            "REMOVE FROM GROUP"

    #define TXT_DALI_CMD_128                "STORE DTR AS SHORT ADDRESS"

    #define TXT_DALI_CMD_129                "ENABLE WRITE MEMORY"

    #define TXT_DALI_CMD_144                "QUERY STATUS"

    #define TXT_DALI_CMD_145                "QUERY CONTROL GEAR"

    #define TXT_DALI_CMD_146                "QUERY LAMP FAILURE"

    #define TXT_DALI_CMD_147                "QUERY LAMP POWER ON"

    #define TXT_DALI_CMD_148                "QUERY LIMIT ERROR"

    #define TXT_DALI_CMD_149                "QUERY RESET STATE"

    #define TXT_DALI_CMD_150                "QUERY MISSING SHORT ADDRESS"

    #define TXT_DALI_CMD_151                "QUERY VERSION NUMBER"

    #define TXT_DALI_CMD_152                "QUERY CONTENT DTR"

    #define TXT_DALI_CMD_153                "QUERY DEVICE TYPE"

    #define TXT_DALI_CMD_154                "QUERY PHYSICAL MINIMUM LEVEL"

    #define TXT_DALI_CMD_155                "QUERY POWER FAILURE"

    #define TXT_DALI_CMD_156                "QUERY CONTENT DTR1"

    #define TXT_DALI_CMD_157                "QUERY CONTENT DTR2"

    #define TXT_DALI_CMD_160                "QUERY ACTUAL LEVEL"

    #define TXT_DALI_CMD_161                "QUERY MAX LEVEL"

    #define TXT_DALI_CMD_162                "QUERY MIN LEVEL"

    #define TXT_DALI_CMD_163                "QUERY POWER ON LEVEL"

    #define TXT_DALI_CMD_164                "QUERY SYSTEM FAILURE LEVEL"

    #define TXT_DALI_CMD_165                "QUERY FADE TIME/FADE RATE"

    #define TXT_DALI_CMD_176_191            "QUERY SCENE"

    #define TXT_DALI_CMD_176                "QUERY SCENE LEVEL (SCENES 0-15)"

    #define TXT_DALI_CMD_192                "QUERY GROUPS 0-7"

    #define TXT_DALI_CMD_193                "QUERY GROUPS 8-15"

    #define TXT_DALI_CMD_194                "QUERY RANDOM ADDRESS (H)"

    #define TXT_DALI_CMD_195                "QUERY RANDOM ADDRESS (M)"

    #define TXT_DALI_CMD_196                "QUERY RANDOM ADDRESS (L)"

    #define TXT_DALI_CMD_197                "READ MEMORY LOCATION"

    #define TXT_DALI_CMD_224                "REST"

    #define TXT_DALI_CMD_225                "INHIBIT"

    #define TXT_DALI_CMD_226                "RE-LIGHT/RESET INHIBIT"

    #define TXT_DALI_CMD_227                "START FUNCTION TEST"

    #define TXT_DALI_CMD_228                "START DURATION TEST"

    #define TXT_DALI_CMD_229                "STOP TEST"

    #define TXT_DALI_CMD_230                "RESET FUNCTION TEST DONE FLAG"

    #define TXT_DALI_CMD_231                "RESET DURATION TEST DONE FLAG"

    #define TXT_DALI_CMD_232                "RESET LAMP TIME"

    #define TXT_DALI_CMD_233                "STORE DTR AS EMERGENCY LEVEL"

    #define TXT_DALI_CMD_234                "STORE TEST DELAY TIMING HIGH BYTE"

    #define TXT_DALI_CMD_235                "STORE TEST DELAY TIMING LOW BYTE"

    #define TXT_DALI_CMD_236                "STORE FUNCTION TEST INTERVAL"

    #define TXT_DALI_CMD_237                "STORE DURATION TEST INTERVAL"

    #define TXT_DALI_CMD_238                "STORE TEST EXECUTION TIMEOUT"

    #define TXT_DALI_CMD_239                "STORE PROLONG TIME"

    #define TXT_DALI_CMD_240                "START IDENTIFICATION"

    #define TXT_DALI_CMD_241                "QUERY BATTERY CHARGE"

    #define TXT_DALI_CMD_242                "QUERY TEST TIMING"

    #define TXT_DALI_CMD_243                "QUERY DURATION TEST RESULT"

    #define TXT_DALI_CMD_244                "QUERY LAMP EMERGENCY TIME"

    #define TXT_DALI_CMD_245                "QUERY LAMP TOTAL OPERATION TIME"

    #define TXT_DALI_CMD_246                "QUERY EMERGENCY LEVEL"

    #define TXT_DALI_CMD_247                "QUERY EMERGENCY MIN LEVEL"

    #define TXT_DALI_CMD_248                "QUERY EMERGENCY MAX LEVEL"

    #define TXT_DALI_CMD_249                "QUERY RATED DURATION"

    #define TXT_DALI_CMD_250                "QUERY EMERGENCY MODE"

    #define TXT_DALI_CMD_251                "QUERY FEATURES"

    #define TXT_DALI_CMD_252                "QUERY FAILURE STATUS"

    #define TXT_DALI_CMD_253                "QUERY EMERGENCY STATUS"

    #define TXT_DALI_CMD_255                "QUERY EXTENDED VERSION NUMBER"

    #define TXT_DALI_CMD_256                "TERMINATE"

    #define TXT_DALI_CMD_257                "DATA TRANSFER REGISTER (DTR)"

    #define TXT_DALI_CMD_258                "INITIALISE"

    #define TXT_DALI_CMD_259                "RANDOMISE"

    #define TXT_DALI_CMD_259_CGLINE         "STORE ID"

    #define TXT_DALI_CMD_260                "COMPARE"

    #define TXT_DALI_CMD_261                "WITHDRAW"

    #define TXT_DALI_CMD_264_266            "SEARCHADDR "

    #define TXT_DALI_CMD_264                "HIGH"

    #define TXT_DALI_CMD_265                "MIDD"

    #define TXT_DALI_CMD_266                "LOW "

    #define TXT_DALI_CMD_267                "PROGRAM SHORT ADDRESS"

    #define TXT_DALI_CMD_268                "VERIFY SHORT ADDRESS"

    #define TXT_DALI_CMD_269                "QUERY SHORT ADDRESS"

    #define TXT_DALI_CMD_270                "PHYSICAL SELECTION"

    #define TXT_DALI_CMD_272                "ENABLE DEVICE TYPE"

    #define TXT_DALI_CMD_273                "DATA TRANSFER REGISTER 1 (DTR1)"

    #define TXT_DALI_CMD_274                "DATA TRANSFER REGISTER 2 (DTR2)"

    #define TXT_DALI_CMD_275                "WRITE MEMORY LOCATION"

    #define TXT_DALI_CMD_400                "QUERY STATUS  HAS CHANGED"

    #define TXT_DALI_CMD_401                "REMOTE CONTROL INSTRUCTION"

    #define TXT_DALI_CMD_401_0              "RESET TEST TIME"

    #define TXT_DALI_CMD_401_1              "POSTPONE 24H NEXT TEST"

    #define TXT_DALI_CMD_401_16             "BAES of BAEH - REST MODE"

    #define TXT_DALI_CMD_401_17             "BAES of BAEH - EMERGENCY MODE"

    #define TXT_DALI_CMD_401_32             "ENABLE DBR FUNCTION"

    #define TXT_DALI_CMD_401_33             "DISABLE DBR FUNCTION"

    #define TXT_DALI_CMD_401_34             "FIRE ALARM IN PROGRESS"

    #define TXT_DALI_CMD_401_35             "DBR SYNCHRONIZATION"

    #define TXT_DALI_CMD_401_36             "DBR LIFE FRAME"

    #define TXT_DALI_CMD_401_37             "DBR - ENABLE FLASH MODE TEST"

    #define TXT_DALI_CMD_401_38             "INHIBIT DBR 2H"

    #define TXT_DALI_CMD_401_39             "SET DBR IN REST MODE"

    #define TXT_DALI_CMD_401_40             "SET DBR IN EMERGENCY MODE"

    #define TXT_DALI_CMD_401_41             "DBR - DISABLE FLASH MODE TEST"

    #define TXT_DALI_CMD_401_42             "STOP INHIBIT DBR 2H"

    #define TXT_DALI_CMD_401_48             "START INCREASED AF-FORDANCE MODE"

    #define TXT_DALI_CMD_401_49             "STOP INCREASED AFFORDANCE MODE"

    #define TXT_DALI_CMD_401_64             "SET MAINTAINED MODE FOR EUROPE"

    #define TXT_DALI_CMD_401_65             "SET SC IN CGLINE+ ONLY"

    #define TXT_DALI_CMD_401_66             "SET SC IN AUTO TEST ONLY"

    #define TXT_DALI_CMD_401_67             "SET INCREASED AFFORDANCE"

    #define TXT_DALI_CMD_402                "START FUNCTION TEST GROUP"

    #define TXT_DALI_CMD_403                "START DURATION TEST GROUP"

    #define TXT_DALI_CMD_UNKNOWN            "COMMAND UNKNOWN"

    // CCB

    #define TXT_CHKSUM                      "[CHECKSUM]"

    #define TXT_CHKSUM_ANSWER               "[CHECKSUM ANSWER]"

    #define TXT_START_BIT                   "[START]"

    #define TXT_STOP_BIT                    "[STOPP]"

    #define TXT_PARITY                      "[PARITY]"

    #define TXT_TIMEOUT                     "TIMEOUT"

    #define TXT_CCBC_READ                   "R"

    #define TXT_CCBC_WRITE                  "W"

    #define TXT_CCBC_WRITE_GROUP            "WG"

    #define TXT_CCBD_ALL                    "A "

    #define TXT_CCBD_SERVICE_MODULE         "SM"

    #define TXT_UI8_CCB_HW_VERSION          "HW_VERSION"

    #define TXT_UI8_CCB_SW_VERSION          "SW_VERSION"

    #define TXT_UI8_CCB_CONTROL_INIT        "CONTROL_INIT"

    #define TXT_UI8_CCB_CM_TYPE             "CM_TYPE"

    #define TXT_CM_TYPE_1A7                 "CM 1,7A"

    #define TXT_CM_TYPE_3A4                 "CM 3,4A"

    #define TXT_UI16_CCB_FAN_MTBF           "FAN_MTBF"

    #define TXT_UI16_CCB_OPHRS_CM           "OPHRS_CM"

    #define TXT_UI16_CCB_OPHRS_CM_FAN       "OPHRS_CM_FAN"

    #define TXT_UI16_CCB_OPHRS_DCDC         "OPHRS_DCDC"

    #define TXT_UI8_CCB_GROUP               "GROUP"

    #define TXT_GROUPS                      "GROUP_8"

    #define TXT_GROUP_NON                   "NO GROUP"

    #define TXT_UI8_CCB_CONTROL             "CONTROL"

    #define TXT_CONTROL_RESET               "RESET"

    #define TXT_CONTROL_ERROR_ACK           "ERROR_ACK"

    #define TXT_CONTROL_CM_ON               "CM_ON"

    #define TXT_CONTROL_CM_OFF              "CM_OFF"

    #define TXT_UI8_CCB_STATUS              "STATUS"

    #define TXT_STATUS_FAN_ON               "FAN_ON"

    #define TXT_STATUS_FAN_OFF              "FAN_OFF"

    #define TXT_STATUS_CM_ON                "CM_ON"

    #define TXT_STATUS_CM_OFF               "CM_OFF"

    #define TXT_UI8_CCB_ERROR               "ERROR"

    #define TXT_ERROR_NON                   "NO ERROR"

    #define TXT_ERROR_GENERAL               "GENERAL"

    #define TXT_ERROR_COM                   "COM"

    #define TXT_ERROR_COM_TIMEOUT           "COM_TIMEOUT"

    #define TXT_ERROR_FAN                   "FAN"

    #define TXT_ERROR_TEMPERATURE           "TEMPERATURE"

    #define TXT_ERROR_UNDERVOLTAGE          "UNDERVOLTAGE"

    #define TXT_ERROR_OVERVOLTAGE           "OVERVOLTAGE"

    #define TXT_UI8_CCB_COM_TIMEOUT         "COM_TIMEOUT"

    #define TXT_UI8_CCB_TEMPERATURE         "TEMPERATURE"

    #define TXT_UI8_CCB_FAN_SPEED           "FAN_SPEED"

    #define TXT_UI16_CCB_U                  "U"

    #define TXT_UI16_CCB_I                  "I"

    #define TXT_UI16_CCB_U_SETPOINT         "U_SETPOINT"

    #define TXT_UI8_CCB_I_SETPOINT          "I_SETPOINT"

    #define TXT_UI16_CCB_U_DEF_SETPOINT     "U_DEF_SETPOINT"

    #define TXT_UI8_CCB_I_DEF_SETPOINT      "I_DEF_SETPOINT"

    #define TXT_UI16_CCB_OV_SETPOINT        "OV_SETPOINT"

    #define TXT_UI16_CCB_UV_SETPOINT        "UV_SETPOINT"

    #define TXT_UI8_CCB_SM_CMD              "SERVICE_CMD"

    #define TXT_UI8_CCB_SM_DAT              "SERVICE_DAT"

    #define TXT_UI8_CCB_S_BAT               "S_BAT"

    #define TXT_UI8_CCB_S_BCMCFG            "S_BCMCFG"

    #define TXT_UI8_CCB_S_BCMSTAT           "S_BCMSTAT"

    #define TXT_UI8_CCB_S_CM                "S_CM"

    #define TXT_UI8_CCB_S_CMLNK             "S_LNK"

    #define TXT_UI8_CCB_S_CMSYS             "S_SYS"

    #define TXT_UI8_CCB_S_TMR               "S_TMR"

    #define TXT_UI16_CCB_CPA_U              "CPA_U"

    #define TXT_UI16_CCB_CPB_U              "CPB_U"

    #define TXT_UI16_CCB_CPA_IC             "CPA_IC"

    #define TXT_UI16_CCB_CPB_IC             "CPB_IC"

    #define TXT_UI16_CCB_CPA_ID             "CPA_ID"

    #define TXT_UI16_CCB_CPB_ID             "CPB_ID"

    #define TXT_UI16_CCB_CPA_T              "CPA_T"

    #define TXT_UI16_CCB_CPB_T              "CPB_T"

    #define TXT_UI8_CCB_SOFTWARE_VERSION    "SW_VERSION_BCM"

    #define TXT_NO_ANSWER                   "NO ANSWER"

    #define TXT_ALL                         " All " //5 chars, 1 space

    #define TXT_DEVICE                      "Device "   //7 chars

    #define TXT_YES                         " YES"  //4 chars

    #define TXT_NO                          "  NO"  //4 chars

    #define TXT_LINE                        "L"

    //----------------------------------German--------------------------------

    #define GER_TXT_CONFIG                      "Aktuelle Konfiguration:"

    #define GER_TXT_LANG                        "Sprache: Deutsch"

    #define GER_TXT_OUT                         "Ausgabe:"

    #define GER_TXT_DALI_CMD_DAPC               "DIREKTES LAMPENLEISTUNGSNIVEAU"//NIVEAU DE PUISSANCE DIRECT DE LA LAMPE

    #define GER_TXT_DALI_CMD_000                "AUS"//DE

    #define GER_TXT_DALI_CMD_001                "HELLER" //Plus clair

    #define GER_TXT_DALI_CMD_002                "DUNKLER"//"PLUS SOMBRE"

    #define GER_TXT_DALI_CMD_003                "EINE STUFE HELLER"//"UNE MARCHE PLUS CLAIRE"

    #define GER_TXT_DALI_CMD_004                "EINE STUFE DUNKLER"//"UNE MARCHE PLUS SOMBRE"

    #define GER_TXT_DALI_CMD_005                "ABRUF MAX-WERT"//"APPEL DE VALEUR MAX"

    #define GER_TXT_DALI_CMD_006                "ABRUF MIN-WERT"//"APPEL DE VALEUR Min"

    #define GER_TXT_DALI_CMD_007                "DUNKLER UND AUSSCHALTEN"//PLUS SOMBRE ET ?TEINT

    #define GER_TXT_DALI_CMD_008                "HELLER UND EINSCHALTEN"//"ECLAIRER ET ALLUMER"

    #define GER_TXT_DALI_CMD_009                "STARTE DAPC-SEQUENZ"//"S?QUENCE DE D?MARRAGE DAPC"

    #define GER_TXT_DALI_CMD_016_031            "GEHE ZUR SZENE"//Aller ? LA SC?NE

    #define GER_TXT_DALI_CMD_032                "R?CKSETZEN"//R?INITIALISATION"

    #define GER_TXT_DALI_CMD_033                "AKTUELLER WERT IM DTR SPEICHERN"//VALEUR COURANTE DANS UN ENREGISTREMENT DTR

    #define GER_TXT_DALI_CMD_042                "SPEICHER DTR ALS MAX-WERT"//MEMOIRE DTR EN TANT QUE VALEUR MAX"

    #define GER_TXT_DALI_CMD_043                "SPEICHER DTR ALS MIN-WERT"//MEMOIRE DTR EN TANT QUE VALEUR Min"

    #define GER_TXT_DALI_CMD_044                "SPEICHER DTR ALS SYSTEMFEHLER-WERT"//MEMOIRE DTR UTILISEE COMME VALEUR D?ERREUR DE SYSTEME

    #define GER_TXT_DALI_CMD_045                "SPEICHER DTR ALS POWER-ON-WERT"//MEMOIRE DTR EN TANT QUE VALEUR DE PUISSANCE"

    #define GER_TXT_DALI_CMD_046                "SPEICHER DTR ALS STUFENZEIT"//MEMOIRE DTR EN TEMPS DE MARCHE"

    #define GER_TXT_DALI_CMD_047                "SPEICHER DTR ALS STUFENGESCHWINDIGKEIT"//MEMOIRE DTR UTILISEE COMME VITESSE DE MARCHE"

    #define GER_TXT_DALI_CMD_064_079            "SPEICHER DTR ALS SZENE"//MEMOIRE DTR EN TANT QUE SCENE

    #define GER_TXT_DALI_CMD_080_095            "ENTFERNEN AUS SZENE"//SUPPRESSION DE LA SC?NE

    #define GER_TXT_DALI_CMD_096_111            "HINZUF?GEN ZUR GRUPPE"//AJOUTER AU GROUPE

    #define GER_TXT_DALI_CMD_112_127            "ENTFERNEN AUS GRUPPE"//RETRAIT DU GROUPE

    #define GER_TXT_DALI_CMD_128                "SPEICHER DTR ALS KURZADRESSE"//MEMOIRE DTR EN TANT QU?ADRESSE COURTE"

    #define GER_TXT_DALI_CMD_129                "AKTIVIERE SPEICHER-BESCHREIBEN"//ECRITURE DE MEMOIRE ACTIVEE

    #define GER_TXT_DALI_CMD_144                "ABFRAGE STATUS"//CONSULTATION STATUT

    #define GER_TXT_DALI_CMD_145                "ABFRAGE VORSCHALTGERAET"//INTERROGATION DE BALLAST

    #define GER_TXT_DALI_CMD_146                "ABFRAGE LAMPENAUSFALL"//DEMANDE DE PANNE DE LAMPE

    #define GER_TXT_DALI_CMD_147                "ABFRAGE STROMVERSORGUNG LAMPE AN"//MISE SOUS TENSION DE LA LAMPE

    #define GER_TXT_DALI_CMD_148                "ABFRAGE GRENZWERTFEHLER"//INTERROGATION ERREUR LIMITE

    #define GER_TXT_DALI_CMD_149                "ABFRAGE R?CKSETZZUSTAND"//ETAT DE REMISE A ZERO D?INTERROGATION

    #define GER_TXT_DALI_CMD_150                "ABFRAGE KURZADRESSE FEHLT"//INTERROGATION ADRESSE COURTE MANQUANTE

    #define GER_TXT_DALI_CMD_151                "ABFRAGE VERSIONSNUMMER"//CONSULTATION NUM?RO DE VERSION

    #define GER_TXT_DALI_CMD_152                "ABFRAGE INHALT DTR"//INTERROGATION DE CONTENU DTR

    #define GER_TXT_DALI_CMD_153                "ABFRAGE GER?TETYP"//INTERROGATION DU TYPE D?APPAREIL

    #define GER_TXT_DALI_CMD_154                "ABFRAGE PHYSIKALISCHER MIN-WERT"//INTERROGATION DE VALEUR MIN PHYSIQUE

    #define GER_TXT_DALI_CMD_155                "ABFRAGE ST?RUNG DER STROMVERSORGUNG"//PERTURBATION D?INTERROGATION DE L?ALIMENTATION ELECTRIQUE

    #define GER_TXT_DALI_CMD_156                "ABFRAGE INHALT DTR1"//INTERROGATION DE CONTENU DTR1

    #define GER_TXT_DALI_CMD_157                "ABFRAGE INHALT DTR2"//INTERROGATION DE CONTENU DTR2

    #define GER_TXT_DALI_CMD_160                "ABFRAGE AKTUELLER WERT"//REQU TE DE VALEUR COURANTE

    #define GER_TXT_DALI_CMD_161                "ABFRAGE MAX-WERT"//REQU TE VALEUR MAX

    #define GER_TXT_DALI_CMD_162                "ABFRAGE MIN-WERT"//REQU TE VALEUR Min

    #define GER_TXT_DALI_CMD_163                "ABFRAGE POWER-ON-WERT"//INTERROGATION DE LA VALEUR POWER-ON

    #define GER_TXT_DALI_CMD_164                "ABFRAGE SYSTEMFEHLER-WERT"//VALEUR D?ERREUR DE SYSTEME D?INTERROGATION

    #define GER_TXT_DALI_CMD_165                "ABFRAGE FADE TIME/FADE RATE"//INTERROGATION TEMPS/TAUX DE FADE

    #define GER_TXT_DALI_CMD_176_191            "ABFRAGE SZENE"//INTERROGATEUR SC?NE

    #define GER_TXT_DALI_CMD_192                "ABFRAGE GRUPPEN 0-7"//INTERROGATION GROUPES 0-7

    #define GER_TXT_DALI_CMD_193                "ABFRAGE GRUPPEN 8-15"//INTERROGATION GROUPES 8-15

    #define GER_TXT_DALI_CMD_194                "ABFRAGE ID (H)"//ID DE REQU TE (H)

    #define GER_TXT_DALI_CMD_195                "ABFRAGE ID (M)"//ID DE REQU TE (M)

    #define GER_TXT_DALI_CMD_196                "ABFRAGE ID (L)"//ID DE REQU TE (L)

    #define GER_TXT_DALI_CMD_197                "ABFRAGE SPEICHERSTELLE"//SITE D?INTERROGATION

    #define GER_TXT_DALI_CMD_224                "RUHEBETRIEB"//FONCTIONNEMENT AU REPOS

    #define GER_TXT_DALI_CMD_225                "BLOCKIEREN"//Blocage

    #define GER_TXT_DALI_CMD_226                "FREIGEBEN"//Valider

    #define GER_TXT_DALI_CMD_227                "START FUNKTIONSTEST"//D?BUT DU TEST DE FONCTIONNEMENT

    #define GER_TXT_DALI_CMD_228                "START BETRIEBSDAUERTEST"//D?MARRAGE EN SERVICE

    #define GER_TXT_DALI_CMD_229                "STOPP TEST"//stop test

    #define GER_TXT_DALI_CMD_230                "FT-DURCHGEF?HRT-FLAG ZUR?CKSETZEN"//REMISE A ZERO DU DRAPEAU EXECUTE PAR FT

    #define GER_TXT_DALI_CMD_231                "BT-DURCHGEF?HRT-FLAG ZUR?CKSETZEN"//RETOUR DU DRAPEAU BT

    #define GER_TXT_DALI_CMD_232                "BETRIEBSZEITEN ZUR?CKSETZEN"//REMISE A Z?RO DES HEURES DE FONCTIONNEMENT

    #define GER_TXT_DALI_CMD_233                "SPEICHER DTR ALS NOTLICHT HELLIGKEIT"//MEMOIRE DTR UTILISEE COMME ECLAIRAGE DE SECOURS

    #define GER_TXT_DALI_CMD_234                "SPEICHER DTR ALS TESTVERZ?GERUNG(H)"//MEMOIRE DTR UTILISEE COMME RETARDATEUR DE TEST(H)

    #define GER_TXT_DALI_CMD_235                "SPEICHER DTR ALS TESTVERZ?GERUNG(L)"//MEMOIRE DTR UTILISEE COMME RETARDATEUR DE TEST(L)

    #define GER_TXT_DALI_CMD_236                "SPEICHER DTR ALS FT INTERVAL"//MEMOIRE DTR EN TANT QU?INTERVAL FT

    #define GER_TXT_DALI_CMD_237                "SPEICHER DTR ALS BT INTERVAL"//MEMOIRE DTR EN TANT QU?INTERVAL BT

    #define GER_TXT_DALI_CMD_238                "SPEICHER DTR ALS TEST-TIMEOUT"//MEMOIRE DTR UTILISEE COMME TIMEOUT DE TEST

    #define GER_TXT_DALI_CMD_239                "SPEICHER DTR ALS VORLAUFZEIT"//MEMOIRE DTR EN TANT QUE TEMPS D?AVANCE

    #define GER_TXT_DALI_CMD_240                "IDENTIFIZIERUNG STARTEN"//IDENTIFICATION DU DEMARRAGE

    #define GER_TXT_DALI_CMD_241                "ABFRAGE LADEZUSTAND"//INTERROGATION ?tat de charge

    #define GER_TXT_DALI_CMD_242                "ABFRAGE TEST ZEITEN"//TEMPS DE TEST D?INTERROGATION

    #define GER_TXT_DALI_CMD_243                "ABFRAGE BT TEST TIME"//INTERROGATION BT TEST TIME

    #define GER_TXT_DALI_CMD_244                "ABFRAGE SUMME NOTLICHT BETRIEBSZEIT"//INTERROGATION TOTAL TEMPS DE FONCTIONNEMENT DE SECOURS

    #define GER_TXT_DALI_CMD_245                "ABFRAGE SUMME LAMPEN BETRIEBSZEIT"//INTERROGATION DE LA SOMME DES DUR?ES DE FONCTIONNEMENT DES LAMPES

    #define GER_TXT_DALI_CMD_246                "ABFRAGE NOTLICHT HELLIGKEIT"//INTERROGATION DE LA LUMINOSITE DE SECOURS

    #define GER_TXT_DALI_CMD_247                "ABFRAGE NOTLICHT MIN HELLIGKEIT"//INTERROGATION LUMI?RE DE SECOURS MIN LUMINOSIT?

    #define GER_TXT_DALI_CMD_248                "ABFRAGE NOTLICHT MAX HELLIGKEIT"//INTERROGATION LUMI?RE DE SECOURS MAX LUMINOSIT?

    #define GER_TXT_DALI_CMD_249                "ABFRAGE NOTLICHT BETRIEBSZEIT"//INTERROGATION DE TEMPS DE FONCTIONNEMENT DE SECOURS

    #define GER_TXT_DALI_CMD_250                "ABFRAGE NOTLICHT MODE"//INTERROGATION DE MODE DE SECOURS

    #define GER_TXT_DALI_CMD_251                "ABFRAGE FEATURES"//INTERROGATION DES OBJETS

    #define GER_TXT_DALI_CMD_252                "ABFRAGE FAILURE STATUS"//INTERROGATION DU STATUT FAILURE

    #define GER_TXT_DALI_CMD_253                "ABFRAGE NOTLICHT STATUS"//INTERROGATION DE L?ETAT D?URGENCE

    #define GER_TXT_DALI_CMD_255                "ABFRAGE EXTENDED VERSION NUMBER"//INTERROGATION NUMERO EXTENDED VERSION

    #define GER_TXT_DALI_CMD_256                "BEENDEN"//Arret

    #define GER_TXT_DALI_CMD_257                "DTR"

    #define GER_TXT_DALI_CMD_258                "INITIALISIEREN"//Inituialisation

    #define GER_TXT_DALI_CMD_259                "LANGADRESSE SPEICHERN"//ENREGISTRER UNE ADRESSE LONGUE

    #define GER_TXT_DALI_CMD_259_CGLINE         "SPEICHER ID"//ID DE STOCKAGE

    #define GER_TXT_DALI_CMD_260                "VERGLEICHEN"//Comparaison

    #define GER_TXT_DALI_CMD_261                "ZUR?CKZIEHEN"//RETRAIT

    #define GER_TXT_DALI_CMD_264_266            "SUCHMASKE "//Champ de recherche

    #define GER_TXT_DALI_CMD_264                "HIGH"

    #define GER_TXT_DALI_CMD_265                "MIDD"

    #define GER_TXT_DALI_CMD_266                "LOW "

    #define GER_TXT_DALI_CMD_267                "PROGRAMMIERE KURZADRESSE"//PROGRAMMATION ADRESSE COURTE

    #define GER_TXT_DALI_CMD_268                "?BERPR?FE KURZADRESSE"//ADRESSE ABR?G?E V?RIFI?E

    #define GER_TXT_DALI_CMD_269                "ABFRAGE KURZADRESSE"//INTERROGATION ADRESSE COURTE

    #define GER_TXT_DALI_CMD_270                "PHYSIKALISCHE AUSWAHL"//SELECTION PHYSIQUE

    #define GER_TXT_DALI_CMD_272                "AKTIVIERE GER?TE-TYP"//TYPE DE DISPOSITIF ACTIVE

    #define GER_TXT_DALI_CMD_273                "DTR1"

    #define GER_TXT_DALI_CMD_274                "DTR2"

    #define GER_TXT_DALI_CMD_275                "SCHREIBE SPEICHERSTELLE"//BUREAU D?ECRITURE

    #define GER_TXT_DALI_CMD_400                "ABFRAGE STATUS WECHSEL"//REQU TE DE CHANGEMENT D?TAT

    #define GER_TXT_DALI_CMD_401                "REMOTE CONTROL INSTRUCTION"

    #define GER_TXT_DALI_CMD_402                "START FUNKTIONS TEST GRUPPE"

    #define GER_TXT_DALI_CMD_403                "START DAUER TEST GRUPPE"//D?BUT DU GROUPE TEST DUR?E

    #define GER_TXT_DALI_CMD_UNKNOWN            "UNBEKANNTER BEFEHL" //ORDRE INCONNU

    // CCB

    #define GER_TXT_CHKSUM                      "[CHECKSUM]"

    #define GER_TXT_CHKSUM_ANSWER               "[CHECKSUM ANSWER]"

    #define GER_TXT_START_BIT                   "[START]"

    #define GER_TXT_STOP_BIT                    "[STOPP]"

    #define GER_TXT_PARITY                      "[PARITY]"

    #define GER_TXT_TIMEOUT                     "TIMEOUT"

    #define GER_TXT_CCBC_READ                   "R"

    #define GER_TXT_CCBC_WRITE                  "W"

    #define GER_TXT_CCBC_WRITE_GROUP            "WG"

    #define GER_TXT_CCBD_ALL                    "A "

    #define GER_TXT_CCBD_SERVICE_MODULE         "SM"

    #define GER_TXT_UI8_CCB_HW_VERSION          "HW_VERSION"

    #define GER_TXT_UI8_CCB_SW_VERSION          "SW_VERSION"

    #define GER_TXT_UI8_CCB_CONTROL_INIT        "CONTROL_INIT"

    #define GER_TXT_UI8_CCB_CM_TYPE             "CM_TYPE"

    #define GER_TXT_CM_TYPE_1A7                 "CM 1,7A"

    #define GER_TXT_CM_TYPE_3A4                 "CM 3,4A"

    #define GER_TXT_UI16_CCB_FAN_MTBF           "FAN_MTBF"

    #define GER_TXT_UI16_CCB_OPHRS_CM           "OPHRS_CM"

    #define GER_TXT_UI16_CCB_OPHRS_CM_FAN       "OPHRS_CM_FAN"

    #define GER_TXT_UI16_CCB_OPHRS_DCDC         "OPHRS_DCDC"

    #define GER_TXT_UI8_CCB_GROUP               "GROUPE"

    #define GER_TXT_GROUPS                      "GROUP_8"

    #define GER_TXT_GROUP_NON                   "keiner Gruppe zugeordnet" //aucun groupe

    #define GER_TXT_UI8_CCB_CONTROL             "CONTROL"

    #define GER_TXT_CONTROL_RESET               "RESET"

    #define GER_TXT_CONTROL_ERROR_ACK           "ERROR_ACK"

    #define GER_TXT_CONTROL_CM_ON               "CM_ON"

    #define GER_TXT_CONTROL_CM_OFF              "CM_OFF"

    #define GER_TXT_UI8_CCB_STATUS              "STATUS"

    #define GER_TXT_STATUS_FAN_ON               "FAN_ON"

    #define GER_TXT_STATUS_FAN_OFF              "FAN_OFF"

    #define GER_TXT_STATUS_CM_ON                "CM_ON"

    #define GER_TXT_STATUS_CM_OFF               "CM_OFF"

    #define GER_TXT_UI8_CCB_ERROR               "ERROR"

    #define GER_TXT_ERROR_NON                   "NO ERROR"

    #define GER_TXT_ERROR_GENERAL               "GENERAL"

    #define GER_TXT_ERROR_COM                   "COM"

    #define GER_TXT_ERROR_COM_TIMEOUT           "COM_TIMEOUT"

    #define GER_TXT_ERROR_FAN                   "FAN"

    #define GER_TXT_ERROR_TEMPERATURE           "TEMPERATURE"

    #define GER_TXT_ERROR_UNDERVOLTAGE          "UNDERVOLTAGE"

    #define GER_TXT_ERROR_OVERVOLTAGE           "OVERVOLTAGE"

    #define GER_TXT_UI8_CCB_COM_TIMEOUT         "COM_TIMEOUT"

    #define GER_TXT_UI8_CCB_TEMPERATURE         "TEMPERATURE"

    #define GER_TXT_UI8_CCB_FAN_SPEED           "FAN_SPEED"

    #define GER_TXT_UI16_CCB_U                  "U"

    #define GER_TXT_UI16_CCB_I                  "I"

    #define GER_TXT_UI16_CCB_U_SETPOINT         "U_SETPOINT"

    #define GER_TXT_UI8_CCB_I_SETPOINT          "I_SETPOINT"

    #define GER_TXT_UI16_CCB_U_DEF_SETPOINT     "U_DEF_SETPOINT"

    #define GER_TXT_UI8_CCB_I_DEF_SETPOINT      "I_DEF_SETPOINT"

    #define GER_TXT_UI16_CCB_OV_SETPOINT        "OV_SETPOINT"

    #define GER_TXT_UI16_CCB_UV_SETPOINT        "UV_SETPOINT"

    #define GER_TXT_UI8_CCB_SM_CMD              "SERVICE_CMD"

    #define GER_TXT_UI8_CCB_SM_DAT              "SERVICE_DAT"

    #define GER_TXT_UI8_CCB_S_BAT               "S_BAT"

    #define GER_TXT_UI8_CCB_S_BCMCFG            "S_BCMCFG"

    #define GER_TXT_UI8_CCB_S_BCMSTAT           "S_BCMSTAT"

    #define GER_TXT_UI8_CCB_S_CM                "S_CM"

    #define GER_TXT_UI8_CCB_S_CMLNK             "S_LNK"

    #define GER_TXT_UI8_CCB_S_CMSYS             "S_SYS"

    #define GER_TXT_UI8_CCB_S_TMR               "S_TMR"

    #define GER_TXT_UI16_CCB_CPA_U              "CPA_U"

    #define GER_TXT_UI16_CCB_CPB_U              "CPB_U"

    #define GER_TXT_UI16_CCB_CPA_IC             "CPA_IC"

    #define GER_TXT_UI16_CCB_CPB_IC             "CPB_IC"

    #define GER_TXT_UI16_CCB_CPA_ID             "CPA_ID"

    #define GER_TXT_UI16_CCB_CPB_ID             "CPB_ID"

    #define GER_TXT_UI16_CCB_CPA_T              "CPA_T"

    #define GER_TXT_UI16_CCB_CPB_T              "CPB_T"

    #define GER_TXT_UI8_CCB_SOFTWARE_VERSION    "SW_VERSION_BCM"

    #define GER_TXT_NO_ANSWER                   "Keine Antwort"//pas de reponse

    #define GER_TXT_ALL                         " Alle" //5 chars//tous

    #define GER_TXT_DEVICE                      " Ger?t "   //7 chars//rien

    #define GER_TXT_YES                         "  JA"  //4 chars//oui

    #define GER_TXT_NO                          "NEIN"  //4 chars//non

    #define GER_TXT_LINE                        "L"

    //-----------------------------French----------------------------------

    #define FRA_TXT_CONFIG                      "Current configuration:"

    #define FRA_TXT_LANG                        "Language: French"

    #define FRA_TXT_OUT                         "Output:"

    #define FRA_TXT_DALI_CMD_DAPC               "DIRCT ARC POWER CONTROL"

    #define FRA_TXT_DALI_CMD_000                "OFF"

    #define FRA_TXT_DALI_CMD_001                "UP"

    #define FRA_TXT_DALI_CMD_002                "DOWN"

    #define FRA_TXT_DALI_CMD_003                "STEP UP"

    #define FRA_TXT_DALI_CMD_004                "STEP DOWN"

    #define FRA_TXT_DALI_CMD_005                "RECALL MAX LEVEL"

    #define FRA_TXT_DALI_CMD_006                "RECALL MIN LEVEL"

    #define FRA_TXT_DALI_CMD_007                "STEP DOWN AND OFF"

    #define FRA_TXT_DALI_CMD_008                "ON AND STEP UP"

    #define FRA_TXT_DALI_CMD_009                "ENABLE DAPC SEQUENCE"

    #define FRA_TXT_DALI_CMD_016_031            "GO TO SCENE"

    #define FRA_TXT_DALI_CMD_032                "RESET"

    #define FRA_TXT_DALI_CMD_033                "STORE ACTUAL LEVEL IN THE DTR"

    #define FRA_TXT_DALI_CMD_042                "STORE THE DTR AS MAX LEVEL"

    #define FRA_TXT_DALI_CMD_043                "STORE THE DTR AS MIN LEVEL"

    #define FRA_TXT_DALI_CMD_044                "STORE THE DTR AS SYSTEM FAILURE LEVEL"

    #define FRA_TXT_DALI_CMD_045                "STORE THE DTR AS POWER ON LEVEL"

    #define FRA_TXT_DALI_CMD_046                "STORE THE DTR AS FADE TIME"

    #define FRA_TXT_DALI_CMD_047                "STORE THE DTR AS FADE RATE"

    #define FRA_TXT_DALI_CMD_064_079            "STORE THE DTR AS SCENE"

    #define FRA_TXT_DALI_CMD_080_095            "REMOVE FROM SCENE"

    #define FRA_TXT_DALI_CMD_096_111            "ADD TO GROUP"

    #define FRA_TXT_DALI_CMD_112_127            "REMOVE FROM GROUP"

    #define FRA_TXT_DALI_CMD_128                "STORE DTR AS SHORT ADDRESS"

    #define FRA_TXT_DALI_CMD_129                "ENABLE WRITE MEMORY"

    #define FRA_TXT_DALI_CMD_144                "QUERY STATUS"

    #define FRA_TXT_DALI_CMD_145                "QUERY CONTROL GEAR"

    #define FRA_TXT_DALI_CMD_146                "QUERY LAMP FAILURE"

    #define FRA_TXT_DALI_CMD_147                "QUERY LAMP POWER ON"

    #define FRA_TXT_DALI_CMD_148                "QUERY LIMIT ERROR"

    #define FRA_TXT_DALI_CMD_149                "QUERY RESET STATE"

    #define FRA_TXT_DALI_CMD_150                "QUERY MISSING SHORT ADDRESS"

    #define FRA_TXT_DALI_CMD_151                "QUERY VERSION NUMBER"

    #define FRA_TXT_DALI_CMD_152                "QUERY CONTENT DTR"

    #define FRA_TXT_DALI_CMD_153                "QUERY DEVICE TYPE"

    #define FRA_TXT_DALI_CMD_154                "QUERY PHYSICAL MINIMUM LEVEL"

    #define FRA_TXT_DALI_CMD_155                "QUERY POWER FAILURE"

    #define FRA_TXT_DALI_CMD_156                "QUERY CONTENT DTR1"

    #define FRA_TXT_DALI_CMD_157                "QUERY CONTENT DTR2"

    #define FRA_TXT_DALI_CMD_160                "QUERY ACTUAL LEVEL"

    #define FRA_TXT_DALI_CMD_161                "QUERY MAX LEVEL"

    #define FRA_TXT_DALI_CMD_162                "QUERY MIN LEVEL"

    #define FRA_TXT_DALI_CMD_163                "QUERY POWER ON LEVEL"

    #define FRA_TXT_DALI_CMD_164                "QUERY SYSTEM FAILURE LEVEL"

    #define FRA_TXT_DALI_CMD_165                "QUERY FADE TIME/FADE RATE"

    #define FRA_TXT_DALI_CMD_176_191            "QUERY SCENE"

    #define FRA_TXT_DALI_CMD_176                "QUERY SCENE LEVEL (SCENES 0-15)"

    #define FRA_TXT_DALI_CMD_192                "QUERY GROUPS 0-7"

    #define FRA_TXT_DALI_CMD_193                "QUERY GROUPS 8-15"

    #define FRA_TXT_DALI_CMD_194                "QUERY RANDOM ADDRESS (H)"

    #define FRA_TXT_DALI_CMD_195                "QUERY RANDOM ADDRESS (M)"

    #define FRA_TXT_DALI_CMD_196                "QUERY RANDOM ADDRESS (L)"

    #define FRA_TXT_DALI_CMD_197                "READ MEMORY LOCATION"

    #define FRA_TXT_DALI_CMD_224                "REST"

    #define FRA_TXT_DALI_CMD_225                "INHIBIT"

    #define FRA_TXT_DALI_CMD_226                "RE-LIGHT/RESET INHIBIT"

    #define FRA_TXT_DALI_CMD_227                "START FUNCTION TEST"

    #define FRA_TXT_DALI_CMD_228                "START DURATION TEST"

    #define FRA_TXT_DALI_CMD_229                "STOP TEST"

    #define FRA_TXT_DALI_CMD_230                "RESET FUNCTION TEST DONE FLAG"

    #define FRA_TXT_DALI_CMD_231                "RESET DURATION TEST DONE FLAG"

    #define FRA_TXT_DALI_CMD_232                "RESET LAMP TIME"

    #define FRA_TXT_DALI_CMD_233                "STORE DTR AS EMERGENCY LEVEL"

    #define FRA_TXT_DALI_CMD_234                "STORE TEST DELAY TIMING HIGH BYTE"

    #define FRA_TXT_DALI_CMD_235                "STORE TEST DELAY TIMING LOW BYTE"

    #define FRA_TXT_DALI_CMD_236                "STORE FUNCTION TEST INTERVAL"

    #define FRA_TXT_DALI_CMD_237                "STORE DURATION TEST INTERVAL"

    #define FRA_TXT_DALI_CMD_238                "STORE TEST EXECUTION TIMEOUT"

    #define FRA_TXT_DALI_CMD_239                "STORE PROLONG TIME"

    #define FRA_TXT_DALI_CMD_240                "START IDENTIFICATION"

    #define FRA_TXT_DALI_CMD_241                "QUERY BATTERY CHARGE"

    #define FRA_TXT_DALI_CMD_242                "QUERY TEST TIMING"

    #define FRA_TXT_DALI_CMD_243                "QUERY DURATION TEST RESULT"

    #define FRA_TXT_DALI_CMD_244                "QUERY LAMP EMERGENCY TIME"

    #define FRA_TXT_DALI_CMD_245                "QUERY LAMP TOTAL OPERATION TIME"

    #define FRA_TXT_DALI_CMD_246                "QUERY EMERGENCY LEVEL"

    #define FRA_TXT_DALI_CMD_247                "QUERY EMERGENCY MIN LEVEL"

    #define FRA_TXT_DALI_CMD_248                "QUERY EMERGENCY MAX LEVEL"

    #define FRA_TXT_DALI_CMD_249                "QUERY RATED DURATION"

    #define FRA_TXT_DALI_CMD_250                "QUERY EMERGENCY MODE"

    #define FRA_TXT_DALI_CMD_251                "QUERY FEATURES"

    #define FRA_TXT_DALI_CMD_252                "QUERY FAILURE STATUS"

    #define FRA_TXT_DALI_CMD_253                "QUERY EMERGENCY STATUS"

    #define FRA_TXT_DALI_CMD_255                "QUERY EXTENDED VERSION NUMBER"

    #define FRA_TXT_DALI_CMD_256                "TERMINATE"

    #define FRA_TXT_DALI_CMD_257                "DATA TRANSFER REGISTER (DTR)"

    #define FRA_TXT_DALI_CMD_258                "INITIALISE"

    #define FRA_TXT_DALI_CMD_259                "RANDOMISE"

    #define FRA_TXT_DALI_CMD_259_CGLINE         "STORE ID"

    #define FRA_TXT_DALI_CMD_260                "COMPARE"

    #define FRA_TXT_DALI_CMD_261                "WITHDRAW"

    #define FRA_TXT_DALI_CMD_264_266            "SEARCHADDR "

    #define FRA_TXT_DALI_CMD_264                "HIGH"

    #define FRA_TXT_DALI_CMD_265                "MIDD"

    #define FRA_TXT_DALI_CMD_266                "LOW "

    #define FRA_TXT_DALI_CMD_267                "PROGRAM SHORT ADDRESS"

    #define FRA_TXT_DALI_CMD_268                "VERIFY SHORT ADDRESS"

    #define FRA_TXT_DALI_CMD_269                "QUERY SHORT ADDRESS"

    #define FRA_TXT_DALI_CMD_270                "PHYSICAL SELECTION"

    #define FRA_TXT_DALI_CMD_272                "ENABLE DEVICE TYPE"

    #define FRA_TXT_DALI_CMD_273                "DATA TRANSFER REGISTER 1 (DTR1)"

    #define FRA_TXT_DALI_CMD_274                "DATA TRANSFER REGISTER 2 (DTR2)"

    #define FRA_TXT_DALI_CMD_275                "WRITE MEMORY LOCATION"

    #define FRA_TXT_DALI_CMD_400                "QUERY STATUS  HAS CHANGED"

    #define FRA_TXT_DALI_CMD_401                "REMOTE CONTROL INSTRUCTION"

    #define FRA_TXT_DALI_CMD_402                "START FUNCTION TEST GROUP"

    #define FRA_TXT_DALI_CMD_403                "START DURATION TEST GROUP"

    #define FRA_TXT_DALI_CMD_UNKNOWN            "COMMAND UNKNOWN"

    // CCB

    #define FRA_TXT_CHKSUM                      "[CHECKSUM]"

    #define FRA_TXT_CHKSUM_ANSWER               "[CHECKSUM ANSWER]"

    #define FRA_TXT_START_BIT                   "[START]"

    #define FRA_TXT_STOP_BIT                    "[STOPP]"

    #define FRA_TXT_PARITY                      "[PARITY]"

    #define FRA_TXT_TIMEOUT                     "TIMEOUT"

    #define FRA_TXT_CCBC_READ                   "R"

    #define FRA_TXT_CCBC_WRITE                  "W"

    #define FRA_TXT_CCBC_WRITE_GROUP            "WG"

    #define FRA_TXT_CCBD_ALL                    "A "

    #define FRA_TXT_CCBD_SERVICE_MODULE         "SM"

    #define FRA_TXT_UI8_CCB_HW_VERSION          "HW_VERSION"

    #define FRA_TXT_UI8_CCB_SW_VERSION          "SW_VERSION"

    #define FRA_TXT_UI8_CCB_CONTROL_INIT        "CONTROL_INIT"

    #define FRA_TXT_UI8_CCB_CM_TYPE             "CM_TYPE"

    #define FRA_TXT_CM_TYPE_1A7                 "CM 1,7A"

    #define FRA_TXT_CM_TYPE_3A4                 "CM 3,4A"

    #define FRA_TXT_UI16_CCB_FAN_MTBF           "FAN_MTBF"

    #define FRA_TXT_UI16_CCB_OPHRS_CM           "OPHRS_CM"

    #define FRA_TXT_UI16_CCB_OPHRS_CM_FAN       "OPHRS_CM_FAN"

    #define FRA_TXT_UI16_CCB_OPHRS_DCDC         "OPHRS_DCDC"

    #define FRA_TXT_UI8_CCB_GROUP               "GROUP"

    #define FRA_TXT_GROUPS                      "GROUP_8"

    #define FRA_TXT_GROUP_NON                   "NO GROUP"

    #define FRA_TXT_UI8_CCB_CONTROL             "CONTROL"

    #define FRA_TXT_CONTROL_RESET               "RESET"

    #define FRA_TXT_CONTROL_ERROR_ACK           "ERROR_ACK"

    #define FRA_TXT_CONTROL_CM_ON               "CM_ON"

    #define FRA_TXT_CONTROL_CM_OFF              "CM_OFF"

    #define FRA_TXT_UI8_CCB_STATUS              "STATUS"

    #define FRA_TXT_STATUS_FAN_ON               "FAN_ON"

    #define FRA_TXT_STATUS_FAN_OFF              "FAN_OFF"

    #define FRA_TXT_STATUS_CM_ON                "CM_ON"

    #define FRA_TXT_STATUS_CM_OFF               "CM_OFF"

    #define FRA_TXT_UI8_CCB_ERROR               "ERROR"

    #define FRA_TXT_ERROR_NON                   "NO ERROR"

    #define FRA_TXT_ERROR_GENERAL               "GENERAL"

    #define FRA_TXT_ERROR_COM                   "COM"

    #define FRA_TXT_ERROR_COM_TIMEOUT           "COM_TIMEOUT"

    #define FRA_TXT_ERROR_FAN                   "FAN"

    #define FRA_TXT_ERROR_TEMPERATURE           "TEMPERATURE"

    #define FRA_TXT_ERROR_UNDERVOLTAGE          "UNDERVOLTAGE"

    #define FRA_TXT_ERROR_OVERVOLTAGE           "OVERVOLTAGE"

    #define FRA_TXT_UI8_CCB_COM_TIMEOUT         "COM_TIMEOUT"

    #define FRA_TXT_UI8_CCB_TEMPERATURE         "TEMPERATURE"

    #define FRA_TXT_UI8_CCB_FAN_SPEED           "FAN_SPEED"

    #define FRA_TXT_UI16_CCB_U                  "U"

    #define FRA_TXT_UI16_CCB_I                  "I"

    #define FRA_TXT_UI16_CCB_U_SETPOINT         "U_SETPOINT"

    #define FRA_TXT_UI8_CCB_I_SETPOINT          "I_SETPOINT"

    #define FRA_TXT_UI16_CCB_U_DEF_SETPOINT     "U_DEF_SETPOINT"

    #define FRA_TXT_UI8_CCB_I_DEF_SETPOINT      "I_DEF_SETPOINT"

    #define FRA_TXT_UI16_CCB_OV_SETPOINT        "OV_SETPOINT"

    #define FRA_TXT_UI16_CCB_UV_SETPOINT        "UV_SETPOINT"

    #define FRA_TXT_UI8_CCB_SM_CMD              "SERVICE_CMD"

    #define FRA_TXT_UI8_CCB_SM_DAT              "SERVICE_DAT"

    #define FRA_TXT_UI8_CCB_S_BAT               "S_BAT"

    #define FRA_TXT_UI8_CCB_S_BCMCFG            "S_BCMCFG"

    #define FRA_TXT_UI8_CCB_S_BCMSTAT           "S_BCMSTAT"

    #define FRA_TXT_UI8_CCB_S_CM                "S_CM"

    #define FRA_TXT_UI8_CCB_S_CMLNK             "S_LNK"

    #define FRA_TXT_UI8_CCB_S_CMSYS             "S_SYS"

    #define FRA_TXT_UI8_CCB_S_TMR               "S_TMR"

    #define FRA_TXT_UI16_CCB_CPA_U              "CPA_U"

    #define FRA_TXT_UI16_CCB_CPB_U              "CPB_U"

    #define FRA_TXT_UI16_CCB_CPA_IC             "CPA_IC"

    #define FRA_TXT_UI16_CCB_CPB_IC             "CPB_IC"

    #define FRA_TXT_UI16_CCB_CPA_ID             "CPA_ID"

    #define FRA_TXT_UI16_CCB_CPB_ID             "CPB_ID"

    #define FRA_TXT_UI16_CCB_CPA_T              "CPA_T"

    #define FRA_TXT_UI16_CCB_CPB_T              "CPB_T"

    #define FRA_TXT_UI8_CCB_SOFTWARE_VERSION    "SW_VERSION_BCM"

    #define FRA_TXT_NO_ANSWER                   "NO ANSWER"

    #define FRA_TXT_ALL                         " All "     //5 chars

    #define FRA_TXT_DEVICE                      "Device "   //7 chars

    #define FRA_TXT_YES                         " YES"  //4 chars

    #define FRA_TXT_NO                          "  NO"  //4 chars

    #define FRA_TXT_LINE                        "L"

    #endif  // TEXTE_H_

« Précédent
1
…
8
9
10
Suivant »

(10-10/10)

Projet

Général

Profil

Polytech Projets Ge » Polytech Ge Sous Traitance

Feature #12061 » texte.h