Projet

Général

Profil

Télécharger (26,4 ko)

Usb inc » usb_ch9.h

Anonyme, 24/11/2021 14:35

 
// DOM-IGNORE-BEGIN
/*******************************************************************************
Copyright 2015 Microchip Technology Inc. (www.microchip.com)

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

To request to license the code under the MLA license (www.microchip.com/mla_license),
please contact mla_licensing@microchip.com
*******************************************************************************/
//DOM-IGNORE-END


/*******************************************************************************
Module for Microchip USB Library

Company:
Microchip Technology Inc.

File Name:
usb_ch9.h

Summary:
Defines types associated with chapter 9 of the USB specification.

Description:
Defines types associated with chapter 9 of the USB specification.
*******************************************************************************/

#ifndef _USB_CH9_H_
#define _USB_CH9_H_

#include <stdint.h>

#if defined(__XC8)
#define PACKED
#else
#define PACKED __attribute__((packed))
#endif

// *****************************************************************************
// *****************************************************************************
// Section: USB Descriptors
// *****************************************************************************
// *****************************************************************************

#define USB_DESCRIPTOR_DEVICE 0x01 // bDescriptorType for a Device Descriptor.
#define USB_DESCRIPTOR_CONFIGURATION 0x02 // bDescriptorType for a Configuration Descriptor.
#define USB_DESCRIPTOR_STRING 0x03 // bDescriptorType for a String Descriptor.
#define USB_DESCRIPTOR_INTERFACE 0x04 // bDescriptorType for an Interface Descriptor.
#define USB_DESCRIPTOR_ENDPOINT 0x05 // bDescriptorType for an Endpoint Descriptor.
#define USB_DESCRIPTOR_DEVICE_QUALIFIER 0x06 // bDescriptorType for a Device Qualifier.
#define USB_DESCRIPTOR_OTHER_SPEED 0x07 // bDescriptorType for a Other Speed Configuration.
#define USB_DESCRIPTOR_INTERFACE_POWER 0x08 // bDescriptorType for Interface Power.
#define USB_DESCRIPTOR_OTG 0x09 // bDescriptorType for an OTG Descriptor.

// *****************************************************************************
/* USB Device Descriptor Structure

This struct defines the structure of a USB Device Descriptor.
*/
typedef struct PACKED _USB_DEVICE_DESCRIPTOR
{
uint8_t bLength; // Length of this descriptor.
uint8_t bDescriptorType; // DEVICE descriptor type (USB_DESCRIPTOR_DEVICE).
uint16_t bcdUSB; // USB Spec Release Number (BCD).
uint8_t bDeviceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific.
uint8_t bDeviceSubClass; // Subclass code (assigned by the USB-IF).
uint8_t bDeviceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific.
uint8_t bMaxPacketSize0; // Maximum packet size for endpoint 0.
uint16_t idVendor; // Vendor ID (assigned by the USB-IF).
uint16_t idProduct; // Product ID (assigned by the manufacturer).
uint16_t bcdDevice; // Device release number (BCD).
uint8_t iManufacturer; // Index of String Descriptor describing the manufacturer.
uint8_t iProduct; // Index of String Descriptor describing the product.
uint8_t iSerialNumber; // Index of String Descriptor with the device's serial number.
uint8_t bNumConfigurations; // Number of possible configurations.
} USB_DEVICE_DESCRIPTOR;


// *****************************************************************************
/* USB Configuration Descriptor Structure

This struct defines the structure of a USB Configuration Descriptor.
*/
typedef struct PACKED _USB_CONFIGURATION_DESCRIPTOR
{
uint8_t bLength; // Length of this descriptor.
uint8_t bDescriptorType; // CONFIGURATION descriptor type (USB_DESCRIPTOR_CONFIGURATION).
uint16_t wTotalLength; // Total length of all descriptors for this configuration.
uint8_t bNumInterfaces; // Number of interfaces in this configuration.
uint8_t bConfigurationValue; // Value of this configuration (1 based).
uint8_t iConfiguration; // Index of String Descriptor describing the configuration.
uint8_t bmAttributes; // Configuration characteristics.
uint8_t bMaxPower; // Maximum power consumed by this configuration.
} USB_CONFIGURATION_DESCRIPTOR;

// Attributes bits
#define USB_CFG_DSC_REQUIRED 0x80 // Required attribute
#define USB_CFG_DSC_SELF_PWR (0x40|USB_CFG_DSC_REQUIRED) // Device is self powered.
#define USB_CFG_DSC_REM_WAKE (0x20|USB_CFG_DSC_REQUIRED) // Device can request remote wakup


// *****************************************************************************
/* USB Interface Descriptor Structure

This struct defines the structure of a USB Interface Descriptor.
*/
typedef struct PACKED _USB_INTERFACE_DESCRIPTOR
{
uint8_t bLength; // Length of this descriptor.
uint8_t bDescriptorType; // INTERFACE descriptor type (USB_DESCRIPTOR_INTERFACE).
uint8_t bInterfaceNumber; // Number of this interface (0 based).
uint8_t bAlternateSetting; // Value of this alternate interface setting.
uint8_t bNumEndpoints; // Number of endpoints in this interface.
uint8_t bInterfaceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific.
uint8_t bInterfaceSubClass; // Subclass code (assigned by the USB-IF).
uint8_t bInterfaceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific.
uint8_t iInterface; // Index of String Descriptor describing the interface.
} USB_INTERFACE_DESCRIPTOR;


// *****************************************************************************
/* USB Endpoint Descriptor Structure

This struct defines the structure of a USB Endpoint Descriptor.
*/
typedef struct PACKED _USB_ENDPOINT_DESCRIPTOR
{
uint8_t bLength; // Length of this descriptor.
uint8_t bDescriptorType; // ENDPOINT descriptor type (USB_DESCRIPTOR_ENDPOINT).
uint8_t bEndpointAddress; // Endpoint address. Bit 7 indicates direction (0=OUT, 1=IN).
uint8_t bmAttributes; // Endpoint transfer type.
uint16_t wMaxPacketSize; // Maximum packet size.
uint8_t bInterval; // Polling interval in frames.
} USB_ENDPOINT_DESCRIPTOR;


// Endpoint Direction
#define EP_DIR_IN 0x80 // Data flows from device to host
#define EP_DIR_OUT 0x00 // Data flows from host to device


// ******************************************************************
// USB Endpoint Attributes
// ******************************************************************

// Section: Transfer Types
#define EP_ATTR_CONTROL (0<<0) // Endoint used for control transfers
#define EP_ATTR_ISOCH (1<<0) // Endpoint used for isochronous transfers
#define EP_ATTR_BULK (2<<0) // Endpoint used for bulk transfers
#define EP_ATTR_INTR (3<<0) // Endpoint used for interrupt transfers

// Section: Synchronization Types (for isochronous endpoints)
#define EP_ATTR_NO_SYNC (0<<2) // No Synchronization
#define EP_ATTR_ASYNC (1<<2) // Asynchronous
#define EP_ATTR_ADAPT (2<<2) // Adaptive synchronization
#define EP_ATTR_SYNC (3<<2) // Synchronous

// Section: Usage Types (for isochronous endpoints)
#define EP_ATTR_DATA (0<<4) // Data Endpoint
#define EP_ATTR_FEEDBACK (1<<4) // Feedback endpoint
#define EP_ATTR_IMP_FB (2<<4) // Implicit Feedback data EP

// Section: Max Packet Sizes
#define EP_MAX_PKT_INTR_LS 8 // Max low-speed interrupt packet
#define EP_MAX_PKT_INTR_FS 64 // Max full-speed interrupt packet
#define EP_MAX_PKT_ISOCH_FS 1023 // Max full-speed isochronous packet
#define EP_MAX_PKT_BULK_FS 64 // Max full-speed bulk packet
#define EP_LG_PKT_BULK_FS 32 // Large full-speed bulk packet
#define EP_MED_PKT_BULK_FS 16 // Medium full-speed bulk packet
#define EP_SM_PKT_BULK_FS 8 // Small full-speed bulk packet

/* Descriptor IDs
The descriptor ID type defines the information required by the HOST during a
GET_DESCRIPTOR request
*/
typedef struct
{
uint8_t index;
uint8_t type;
uint16_t language_id;

} DESCRIPTOR_ID;

// *****************************************************************************
/* USB OTG Descriptor Structure

This struct defines the structure of a USB OTG Descriptor. Note that this
structure may need to be packed, or even accessed as uint8_ts, to properly access
the correct fields when used on some device architectures.
*/
typedef struct PACKED _USB_OTG_DESCRIPTOR
{
uint8_t bLength; // Length of this descriptor.
uint8_t bDescriptorType; // OTG descriptor type (USB_DESCRIPTOR_OTG).
uint8_t bmAttributes; // OTG attributes.
} USB_OTG_DESCRIPTOR;


// ******************************************************************
// Section: USB String Descriptor Structure
// ******************************************************************
// This structure describes the USB string descriptor. The string
// descriptor provides user-readable information about various aspects of
// the device. The first string descriptor (string descriptor zero (0)),
// provides a list of the number of languages supported by the set of
// string descriptors for this device instead of an actual string.
//
// Note: The strings are in 2-uint8_t-per-character unicode, not ASCII.
//
// Note: This structure only describes the "header" of the string
// descriptor. The actual data (either the language ID array or the
// array of unicode characters making up the string, must be allocated
// immediately following this header with no padding between them.

typedef struct PACKED _USB_STRING_DSC
{
uint8_t bLength; // Size of this descriptor
uint8_t bDescriptorType; // Type, USB_DSC_STRING

} USB_STRING_DESCRIPTOR;


// ******************************************************************
// Section: USB Device Qualifier Descriptor Structure
// ******************************************************************
// This structure describes the device qualifier descriptor. The device
// qualifier descriptor provides overall device information if the device
// supports "other" speeds.
//
// Note: A high-speed device may support "other" speeds (ie. full or low).
// If so, it may need to implement the the device qualifier and other
// speed descriptors.

typedef struct PACKED _USB_DEVICE_QUALIFIER_DESCRIPTOR
{
uint8_t bLength; // Size of this descriptor
uint8_t bType; // Type, always USB_DESCRIPTOR_DEVICE_QUALIFIER
uint16_t bcdUSB; // USB spec version, in BCD
uint8_t bDeviceClass; // Device class code
uint8_t bDeviceSubClass; // Device sub-class code
uint8_t bDeviceProtocol; // Device protocol
uint8_t bMaxPacketSize0; // EP0, max packet size
uint8_t bNumConfigurations; // Number of "other-speed" configurations
uint8_t bReserved; // Always zero (0)

} USB_DEVICE_QUALIFIER_DESCRIPTOR;

// ******************************************************************
// Section: USB Setup Packet Structure
// ******************************************************************
// This structure describes the data contained in a USB standard device
// request setup packet. It is the data packet sent from the host to
// the device to control and configure the device.
//
// Note: Refer to the USB 2.0 specification for additional details on the
// usage of the setup packet and standard device requests.
typedef union PACKED
{
/** Standard Device Requests ***********************************/
struct PACKED
{
uint8_t bmRequestType; //from table 9-2 of USB2.0 spec
uint8_t bRequest; //from table 9-2 of USB2.0 spec
uint16_t wValue; //from table 9-2 of USB2.0 spec
uint16_t wIndex; //from table 9-2 of USB2.0 spec
uint16_t wLength; //from table 9-2 of USB2.0 spec
};
struct PACKED
{
unsigned :8;
unsigned :8;
union
{
uint16_t Val;
uint8_t v[2];
struct
{
uint8_t LB;
uint8_t HB;
} byte;
} W_Value;

union
{
uint16_t Val;
uint8_t v[2];
struct
{
uint8_t LB;
uint8_t HB;
} byte;
} W_Index;

union
{
uint16_t Val;
uint8_t v[2];
struct
{
uint8_t LB;
uint8_t HB;
} byte;
} W_Length;
};
struct PACKED
{
unsigned Recipient:5; //Device,Interface,Endpoint,Other
unsigned RequestType:2; //Standard,Class,Vendor,Reserved
unsigned DataDir:1; //Host-to-device,Device-to-host
unsigned :8;
uint8_t bFeature; //DEVICE_REMOTE_WAKEUP,ENDPOINT_HALT
unsigned :8;
unsigned :8;
unsigned :8;
unsigned :8;
unsigned :8;
};
struct PACKED
{
union // offset description
{ // ------ ------------------------
uint8_t bmRequestType; // 0 Bit-map of request type
struct
{
uint8_t recipient: 5; // Recipient of the request
uint8_t type: 2; // Type of request
uint8_t direction: 1; // Direction of data X-fer
};
}requestInfo;
};
struct PACKED
{
unsigned :8;
unsigned :8;
uint8_t bDscIndex; //For Configuration and String DSC Only
uint8_t bDescriptorType; //Device,Configuration,String
uint16_t wLangID; //Language ID
unsigned :8;
unsigned :8;
};
struct PACKED
{
unsigned :8;
unsigned :8;
uint8_t bDevADR; //Device Address 0-127
uint8_t bDevADRH; //Must equal zero
unsigned :8;
unsigned :8;
unsigned :8;
unsigned :8;
};
struct PACKED
{
unsigned :8;
unsigned :8;
uint8_t bConfigurationValue; //Configuration Value 0-255
uint8_t bCfgRSD; //Must equal zero (Reserved)
unsigned :8;
unsigned :8;
unsigned :8;
unsigned :8;
};
struct PACKED
{
unsigned :8;
unsigned :8;
uint8_t bAltID; //Alternate Setting Value 0-255
uint8_t bAltID_H; //Must equal zero
uint8_t bIntfID; //Interface Number Value 0-255
uint8_t bIntfID_H; //Must equal zero
unsigned :8;
unsigned :8;
};
struct PACKED
{
unsigned :8;
unsigned :8;
unsigned :8;
unsigned :8;
uint8_t bEPID; //Endpoint ID (Number & Direction)
uint8_t bEPID_H; //Must equal zero
unsigned :8;
unsigned :8;
};
struct PACKED
{
unsigned :8;
unsigned :8;
unsigned :8;
unsigned :8;
unsigned EPNum:4; //Endpoint Number 0-15
unsigned :3;
unsigned EPDir:1; //Endpoint Direction: 0-OUT, 1-IN
unsigned :8;
unsigned :8;
unsigned :8;
};

/** End: Standard Device Requests ******************************/

} CTRL_TRF_SETUP, SETUP_PKT, *PSETUP_PKT;


// ******************************************************************
// ******************************************************************
// Section: USB Specification Constants
// ******************************************************************
// ******************************************************************

// Section: Valid PID Values
//DOM-IGNORE-BEGIN
#define PID_OUT 0x1 // PID for an OUT token
#define PID_ACK 0x2 // PID for an ACK handshake
#define PID_DATA0 0x3 // PID for DATA0 data
#define PID_PING 0x4 // Special PID PING
#define PID_SOF 0x5 // PID for a SOF token
#define PID_NYET 0x6 // PID for a NYET handshake
#define PID_DATA2 0x7 // PID for DATA2 data
#define PID_SPLIT 0x8 // Special PID SPLIT
#define PID_IN 0x9 // PID for a IN token
#define PID_NAK 0xA // PID for a NAK handshake
#define PID_DATA1 0xB // PID for DATA1 data
#define PID_PRE 0xC // Special PID PRE (Same as PID_ERR)
#define PID_ERR 0xC // Special PID ERR (Same as PID_PRE)
#define PID_SETUP 0xD // PID for a SETUP token
#define PID_STALL 0xE // PID for a STALL handshake
#define PID_MDATA 0xF // PID for MDATA data

#define PID_MASK_DATA 0x03 // Data PID mask
#define PID_MASK_DATA_SHIFTED (PID_MASK_DATA << 2) // Data PID shift to proper position
//DOM-IGNORE-END

// Section: USB Token Types
//DOM-IGNORE-BEGIN
#define USB_TOKEN_OUT 0x01 // U1TOK - OUT token
#define USB_TOKEN_IN 0x09 // U1TOK - IN token
#define USB_TOKEN_SETUP 0x0D // U1TOK - SETUP token
//DOM-IGNORE-END

// Section: OTG Descriptor Constants

#define OTG_HNP_SUPPORT 0x02 // OTG Descriptor bmAttributes - HNP support flag
#define OTG_SRP_SUPPORT 0x01 // OTG Descriptor bmAttributes - SRP support flag

// Section: Endpoint Directions

#define USB_IN_EP 0x80 // IN endpoint mask
#define USB_OUT_EP 0x00 // OUT endpoint mask

// Section: Standard Device Requests

#define USB_REQUEST_GET_STATUS 0 // Standard Device Request - GET STATUS
#define USB_REQUEST_CLEAR_FEATURE 1 // Standard Device Request - CLEAR FEATURE
#define USB_REQUEST_SET_FEATURE 3 // Standard Device Request - SET FEATURE
#define USB_REQUEST_SET_ADDRESS 5 // Standard Device Request - SET ADDRESS
#define USB_REQUEST_GET_DESCRIPTOR 6 // Standard Device Request - GET DESCRIPTOR
#define USB_REQUEST_SET_DESCRIPTOR 7 // Standard Device Request - SET DESCRIPTOR
#define USB_REQUEST_GET_CONFIGURATION 8 // Standard Device Request - GET CONFIGURATION
#define USB_REQUEST_SET_CONFIGURATION 9 // Standard Device Request - SET CONFIGURATION
#define USB_REQUEST_GET_INTERFACE 10 // Standard Device Request - GET INTERFACE
#define USB_REQUEST_SET_INTERFACE 11 // Standard Device Request - SET INTERFACE
#define USB_REQUEST_SYNCH_FRAME 12 // Standard Device Request - SYNCH FRAME

#define USB_FEATURE_ENDPOINT_HALT 0 // CLEAR/SET FEATURE - Endpoint Halt
#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // CLEAR/SET FEATURE - Device remote wake-up
#define USB_FEATURE_TEST_MODE 2 // CLEAR/SET FEATURE - Test mode

// Section: Setup Data Constants

#define USB_SETUP_HOST_TO_DEVICE 0x00 // Device Request bmRequestType transfer direction - host to device transfer
#define USB_SETUP_DEVICE_TO_HOST 0x80 // Device Request bmRequestType transfer direction - device to host transfer
#define USB_SETUP_TYPE_STANDARD 0x00 // Device Request bmRequestType type - standard
#define USB_SETUP_TYPE_CLASS 0x20 // Device Request bmRequestType type - class
#define USB_SETUP_TYPE_VENDOR 0x40 // Device Request bmRequestType type - vendor
#define USB_SETUP_RECIPIENT_DEVICE 0x00 // Device Request bmRequestType recipient - device
#define USB_SETUP_RECIPIENT_INTERFACE 0x01 // Device Request bmRequestType recipient - interface
#define USB_SETUP_RECIPIENT_ENDPOINT 0x02 // Device Request bmRequestType recipient - endpoint
#define USB_SETUP_RECIPIENT_OTHER 0x03 // Device Request bmRequestType recipient - other

#define USB_SETUP_HOST_TO_DEVICE_BITFIELD (USB_SETUP_HOST_TO_DEVICE>>7) // Device Request bmRequestType transfer direction - host to device transfer - bit definition
#define USB_SETUP_DEVICE_TO_HOST_BITFIELD (USB_SETUP_DEVICE_TO_HOST>>7) // Device Request bmRequestType transfer direction - device to host transfer - bit definition
#define USB_SETUP_TYPE_STANDARD_BITFIELD (USB_SETUP_TYPE_STANDARD>>5) // Device Request bmRequestType type - standard
#define USB_SETUP_TYPE_CLASS_BITFIELD (USB_SETUP_TYPE_CLASS>>5) // Device Request bmRequestType type - class
#define USB_SETUP_TYPE_VENDOR_BITFIELD (USB_SETUP_TYPE_VENDOR>>5) // Device Request bmRequestType type - vendor
#define USB_SETUP_RECIPIENT_DEVICE_BITFIELD (USB_SETUP_RECIPIENT_DEVICE) // Device Request bmRequestType recipient - device
#define USB_SETUP_RECIPIENT_INTERFACE_BITFIELD (USB_SETUP_RECIPIENT_INTERFACE) // Device Request bmRequestType recipient - interface
#define USB_SETUP_RECIPIENT_ENDPOINT_BITFIELD (USB_SETUP_RECIPIENT_ENDPOINT) // Device Request bmRequestType recipient - endpoint
#define USB_SETUP_RECIPIENT_OTHER_BITFIELD (USB_SETUP_RECIPIENT_OTHER) // Device Request bmRequestType recipient - other

// Section: OTG SET FEATURE Constants

#define OTG_FEATURE_B_HNP_ENABLE 3 // SET FEATURE OTG - Enable B device to perform HNP
#define OTG_FEATURE_A_HNP_SUPPORT 4 // SET FEATURE OTG - A device supports HNP
#define OTG_FEATURE_A_ALT_HNP_SUPPORT 5 // SET FEATURE OTG - Another port on the A device supports HNP

// Section: USB Endpoint Transfer Types

#define USB_TRANSFER_TYPE_CONTROL 0x00 // Endpoint is a control endpoint.
#define USB_TRANSFER_TYPE_ISOCHRONOUS 0x01 // Endpoint is an isochronous endpoint.
#define USB_TRANSFER_TYPE_BULK 0x02 // Endpoint is a bulk endpoint.
#define USB_TRANSFER_TYPE_INTERRUPT 0x03 // Endpoint is an interrupt endpoint.

// Section: Standard Feature Selectors for CLEAR_FEATURE Requests
#define USB_FEATURE_ENDPOINT_STALL 0 // Endpoint recipient
#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // Device recipient
#define USB_FEATURE_TEST_MODE 2 // Device recipient


// Section: USB Class Code Definitions
#define USB_HUB_CLASSCODE 0x09 // Class code for a hub.

/********************************************************************
USB Endpoint Definitions
USB Standard EP Address Format: DIR:X:X:X:EP3:EP2:EP1:EP0
This is used in the descriptors.
********************************************************************/
#define _EP_IN 0x80
#define _EP_OUT 0x00
#define _EP01_OUT 0x01
#define _EP01_IN 0x81
#define _EP02_OUT 0x02
#define _EP02_IN 0x82
#define _EP03_OUT 0x03
#define _EP03_IN 0x83
#define _EP04_OUT 0x04
#define _EP04_IN 0x84
#define _EP05_OUT 0x05
#define _EP05_IN 0x85
#define _EP06_OUT 0x06
#define _EP06_IN 0x86
#define _EP07_OUT 0x07
#define _EP07_IN 0x87
#define _EP08_OUT 0x08
#define _EP08_IN 0x88
#define _EP09_OUT 0x09
#define _EP09_IN 0x89
#define _EP10_OUT 0x0A
#define _EP10_IN 0x8A
#define _EP11_OUT 0x0B
#define _EP11_IN 0x8B
#define _EP12_OUT 0x0C
#define _EP12_IN 0x8C
#define _EP13_OUT 0x0D
#define _EP13_IN 0x8D
#define _EP14_OUT 0x0E
#define _EP14_IN 0x8E
#define _EP15_OUT 0x0F
#define _EP15_IN 0x8F

/* Configuration Attributes */
#define _DEFAULT (0x01<<7) //Default Value (Bit 7 is set)
#define _SELF (0x01<<6) //Self-powered (Supports if set)
#define _RWU (0x01<<5) //Remote Wakeup (Supports if set)
#define _HNP (0x01 << 1) //HNP (Supports if set)
#define _SRP (0x01) //SRP (Supports if set)

/* Endpoint Transfer Type */
#define _CTRL 0x00 //Control Transfer
#define _ISO 0x01 //Isochronous Transfer
#define _BULK 0x02 //Bulk Transfer

#define _INTERRUPT 0x03 //Interrupt Transfer
#if defined(__18CXX) || defined(__C30__) || defined __XC16__ || defined(__XC8)
#define _INT 0x03 //Interrupt Transfer
#endif

/* Isochronous Endpoint Synchronization Type */
#define _NS (0x00<<2) //No Synchronization
#define _AS (0x01<<2) //Asynchronous
#define _AD (0x02<<2) //Adaptive
#define _SY (0x03<<2) //Synchronous

/* Isochronous Endpoint Usage Type */
#define _DE (0x00<<4) //Data endpoint
#define _FE (0x01<<4) //Feedback endpoint
#define _IE (0x02<<4) //Implicit feedback Data endpoint

//These are the directional indicators used for the USBTransferOnePacket()
// function.
#define OUT_FROM_HOST 0
#define IN_TO_HOST 1

#endif // _USB_CH9_H_
/*************************************************************************
* EOF
*/

(2-2/7)